Vezco VZ-IP-BUTIDS-WI User Manual page 15

Steps:
1. Chisel a hole in the wall. The size of the hole should be 76 mm (width) × 76 mm
(length) × 50 mm (depth).
2. Insert the junction box to the hole chiseled on the wall.
3. Fix the wall mounting plate to the junction box with 2 screws.
4. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks
into the slots on the rear panel of the indoor station, during which the lock catch will
be locked automatically.
Hooks
Video Intercom Indoor Station·User Manual
Wall Mounting
Junction Box
Figure 5-2 Install the Plate
Figure 5-3 Hook the Indoor Station to the Plate
Plate
Slot
7
Screws
Lock Catch
Slot