Table of Contents
Advertisement
Video Intercom Indoor Station·User Manual
9.3 Configuring Devices Remotely via VEZPRO
Configuring devices remotely via VEZPRO is the same with that via Batch
Configuration Tool, please refer 8.4 Configuring Devices Remotely for detail steps.
9.4 Picture Storage
When the video intercom device is under armed status, it will capture the picture
automatically after unlocking the door. The captured picture can be uploaded and stored
in the storage server.
When starting the live view of door station via VEZPRO, you can capture the live view
picture. The captured picture can be uploaded and stored in the storage server.
This function is only available to door stations.
You are required to add storage server to the VEZPRO, and format the HDDs first
before uploading and storing captured pictures.
9.4.1 Adding Storage Server
Before you start:
The storage server application software needs to be installed and it is packed in the
VEZPRO software package. When installing the VEZPRO, check the checkbox of
Storage Server to enable the installation of storage server.
1. Click the icon
on the desktop to run the storage server.
2. Open the Device Management page and click the Server tab.
3. Click Add New Device Type, select Storage Server and click OK.
77
Advertisement
Table of Contents
