Table of Contents
Advertisement
2. Switch
to
3. Set the synchronizing interval, enter the IP address of NTP server and port No., and
select the time zone.
The default unit of synchronizing interval is minute.
The default port No. is 123.
Restoring and Upgrading Device
Steps:
1. Get to the device restoring and upgrading interface: Settings -> Configuration ->
Restore.
2. Press the RESTORE button to restore the default settings and reboot the system.
3. Press the UPGRADE button to upgrade the indoor station online.
Video Intercom Indoor Station·User Manual
Figure 9-14 Time Synchronizing Interface
to enable NTP.
33
Advertisement
Table of Contents
