Vezco VZ-IP-BUTIDS-WI User Manual page 66

Click to add the ring, and click
 The ring to be imported should be in the wav format, and the size of the ring cannot
be larger than 300k.
 Up to 4 rings can be added.
Zone
1. Click the Zone Alarm button to enter zone settings interface.
2. Select a zone type from the drop-down list menu.
3. Select an alarm mode from the drop-down list menu.
4. Set the zone status: NO or NC.
5. Set the entering delay, and exiting delay.
6. Click the Save button to enable zone settings.
 Six zone types are supported: Emergency Switch, Door Magnetic Switch, Smoke
Detector, Active IR Detector, Passive IR Detector, and Combustible Gas Detector.
 Three types of alarm mode are supported: Instant Alarm, 24H Alarm, and Delay
Alarm.
Video Intercom Indoor Station·User Manual
Figure 8-27 Ringtone Configuration
to delete the imported ring.
Figure 8-28 Zone Alarm
58