Table of Contents
Advertisement
4.3 Configuration Settings
Purpose:
On the configuration settings interface, you can set and view the local information,
configure the network, manage devices, synchronize the device time, and restore the
default settings.
4.3.1 Changing Configuration Password
The configuration password is required when you set the indoor station locally, such as
the local information checking, the network settings, device connection, time settings,
and default settings restore.
Steps:
1. Press the Settings tab on the touch screen and press the Edit tab to change the
password.
2. Enter the old password to change it.
3. Enter a new password and confirm it.
The configuration password is also called admin password on the device.
The default configuration password (admin password) is 888999.
STRONG PASSWORD RECOMMENDED– We highly recommend you to create a strong
password of your own choosing (using a minimum of 8 characters,
including at least three kinds of following categories: upper case letters,
lower case letters, numbers, and special characters) in order to increase
the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or
weekly can better protect your product.
4.3.2 Setting Local Information
Steps:
1. Press the Settings tab on the touch screen.
2. Press the Configuration tab and enter the admin password (configuration password).
3. Press the Local Info tab to enter the local information settings interface.
4. Select the indoor station type: Indoor Station, or Indoor Extension.
Indoor Station: Set the Room No.
Indoor Extension: Set the Extension No., and set a room name.
5. Press the drop-down list to select a video standard: PAL, or NTSC.
6. Set the maximum live view duration of the device.
The Extension No. is numeric from 1 to 5, i.e., at most 5 indoor extensions can
connect to one indoor station.
Video Intercom Indoor Station·Quick Start Guide
15
Advertisement
Table of Contents
