Toyota Sienna 2010 Owner's Manual page 404

3-7. Other interior features
Test the operation of the HomeLink
STEP 5
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
STEP 6
the remaining HomeLink
Programming other devices
■
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
Reprogramming a button
■
The individual HomeLink
reprogrammed. To reprogram a button, follow the programming
instructions.
Operating the HomeLink
Press the appropriate HomeLink
light on the HomeLink
The HomeLink
as the button is pressed.
Erasing the entire HomeLink
408
®
®
buttons cannot be erased but can be
®
®
transceiver should turn on.
®
continues to send a signal for up to 20 seconds as long
®
®
by pressing the newly
buttons.
®
button. The HomeLink
memory (all three programs)
Press and hold down the 2 out-
side buttons for 20 seconds until
the indicator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
®
HomeLink
®
indicator
memory.