Toyota Sienna 2010 Owner's Manual page 193

Adjusting the speed setting
■
Canceling and resuming regular acceleration
■
Cruise control can be set when
■
The shift lever is in D or 4.
●
Vehicle speed is between approximately 25 mph (40 km/h) and 125 mph
●
(200 km/h).
Accelerating
■
The vehicle can be accelerated normally. After acceleration, the set speed
resumes.
2-4. Using other driving systems
Increase speed
Decrease speed
Hold the lever until the desired
speed setting is obtained.
Fine adjustment of the set
speed (approximately 1.0 mph
[1.6 km/h]) can be made by
lightly pushing the lever up or
down and releasing it.
Cancel
Push the lever towards you to
cancel cruise control.
The speed setting is also can-
celed when the brakes are
applied.
Resume
To resume cruise control and
return to the set speed, push
the lever up.
2
195