Engine (Ignition) Switch - Toyota Sienna 2010 Owner's Manual

2-1. Driving procedures

Engine (ignition) switch

Starting the engine
■
Check that the parking brake is set.
STEP 1
Check that the shift lever is set in P.
STEP 2
Sit in the driver's seat and firmly depress the brake pedal.
STEP 3
Turn the engine switch to the "START" position and start
STEP 4
the engine.
The engine will crank until it starts or for up to 25 seconds, which-
ever is less. If you turn the engine switch, the engine will keep
cranking for about 30 seconds maximum.
Continue depressing the brake pedal until the engine is com-
pletely started.
Engine (ignition) switch
■
"LOCK"
The steering wheel is locked
and the key can be removed.
(The key can be removed only
when the shift lever is in "P".)
"ACC"
Some electrical components
such as the audio system can
be used.
"ON"
All electrical components can
be used.
"START"
For starting the engine.
2
167