Table of Contents
Advertisement
Quick Links
Introducing the Single-Serial PC Card
The Single-Serial PC Card adds one high-speed serial port
(RS232) into your notebook computer to connect various
types of serial devices.
Keys Features and Benefits
•
Works with notebook PC with a PCMCIA or Type
II/III PC Card slot
•
16650 UART supports baud rate up to 115.2Kbps
•
Built-in 16-byte FIFO buffer to speed up data
transfers
•
Works with various RS232 serial devices including
modems, PDAs, label printers, bar code scanners,
and more
•
RoHS compliant
System Requirements
•
Pentium or equivalent notebook computer with an
available PC Card slot
•
Windows
2008 (32-bit) / XP (32-bit) / 2000 / ME / 98SE / 98
Package Contents
•
Single-Serial PC Card
•
Driver CD
•
Quick installation guide
04-0575B
Single-Serial PC Card
Quick Installation Guide
7 (32-bit) / Vista (32-bit) / Server 2003 &
®
1
Advertisement
Table of Contents
Related Manuals for SIIG JJ-PCM012-S2
Summary of Contents for SIIG JJ-PCM012-S2
-
Page 1: Quick Installation Guide
Single-Serial PC Card Quick Installation Guide Introducing the Single-Serial PC Card The Single-Serial PC Card adds one high-speed serial port (RS232) into your notebook computer to connect various types of serial devices. Keys Features and Benefits • Works with notebook PC with a PCMCIA or Type II/III PC Card slot •... -
Page 2: Hardware Installation
Layout PC Card Connector Serial Port (9-pin) Figure 1: Single-Serial PC Card Layout Hardware Installation General instructions for installing the card are provided below. Since the design of notebook computers may vary, refer to your system’s reference manual for further information, if needed. -
Page 3: Driver Installation
Driver Installation Windows 7 (32-bit) Right click Computer, click Manage, then click Device Manager. Right click AVLAB PCMCIA_RS232_550, click Update Driver Software. Insert the driver CD, click Browse my computer for driver software. Close the AutoPlay box if prompted. Type D:\, click Next. (Change D: to match your CD/DVD-ROM drive letter) Click Install this driver sofware anyway. - Page 4 Insert the driver CD. Select Install the software automatically, then click Next. If the Hardware Installation window pops up, click Continue Anyway. Click Finish to complete the installation. Windows Server 2008 (32-bit) At the Found New Hardware Wizard, click Locate and install driver Software (recommended).
- Page 5 Windows 98SE / 98 At the Add New Hardware Wizard, click Next. Select Search for the best driver for your device (Recommended), then click Next. Insert the driver CD, check CD-ROM drives, uncheck the other boxes, and click Next. Click Next, then click Finish. Restart Windows to complete the installation.
-
Page 6: Changing Com Port Number
Changing COM Port Number Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. This option is only for Windows 7, Vista, XP, Server 2003 & 2008, and 2000. From the Device Manager window, double click Ports (COM &... -
Page 7: Technical Support And Warranty
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued. - Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 Single-Serial PC Card is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.