Fluke OMNIScanner 2 User Manual page 24

OMNIS User Guide
CANNER
(Setup) function key.
Select Remote Info to open the REMOTE INFO
screen, which contains the date the reference was
last set, the hardware and software information,
the serial number, the battery indicator, and the
factory calibration data.
The serial number can also be found on the back
of each unit.
To display information for OMNIF , attach the
IBER
OMNIF adapters to OMNIS and OMNIR ,
IBER CANNER EMOTE
connect the units with the supplied fiber launch
cable and press the (Setup) function key.
Select Fiber Info to open the FIBER INFO screen,
which contains the serial numbers, the date the
adapters were last factory calibrated, and the
current reference method.
1 - 15