Table of Contents
Advertisement
Viewing the Parts
Main Parts
LonWorks Gateway Exterior
LCD Display
Shows current time and IP address. Various
messages will be displayed depending on
button input.
LCD operation button
There are 4 buttons(Menu,
(Down),
Set) and you can access to menu and move,
check the menu.
LED Indicator
Check 15 LED status such as Power, CPU-Alive,
Ethernet-Linked/Active, COM1~4-TX/RX,
Lon ACK, Lon SVC and Check.
LonWorks Gateway Bottom cover
Unfasten 2 screws on the bottom and
separate the bottom cover from LonWorks
Gateway. Then check cable connection part.
LED Indicator
Item
Power
Power indicator
CPU Alive
CPU operation indicator
Ethernet–
Internet connection indicator
Linked
Ethernet–
Internet data transmission/reception
Active
indicator
Channel 1~4 OnOff controller/Outdoor unit
COM1~4 – TX
Data transmission Indicator
Channel 1~4 OnOff controller/Outdoor unit
COM1~4 – RX
Data reception Indicator
Lon ACK
LonWorks data reception indicator
Lon SVC
LonWorks device status indicator
Indoor/Outdoor unit/Communication check
Check
Indicator
6
E-
(Up),
Name
Turns blue when the power is supplied.
Blinks in orange with 1 second intervals
during normal operation.
Turns green during normal connection.
Blinks in orange during normal
transmission/reception.
Blinks in green during normal
transmission.
Blinks in green during normal reception.
Blinks in green during normal reception.
Blinks in green during un-configured.
- Needs commission by integration
tool (Ex. LonMaker)
Turns green when notice occurs.
Status
Advertisement
Table of Contents
