Table of Contents
Advertisement
Device Configuration (Continued)
Checking and changing the Object ID
List of equipment connected to LonWorks can be checked when the tracking is
completed.
1
Device Type, Address, Name and Object ID will appear.
2
Object IDs are assigned in order from 1 to 128 when initial tracking is executed.
3
If you want to change the Object ID, click [Edit] and change the Object ID of the
applicable device.
The Object ID can not be used for more than one piece of device.
Object ID can be entered between 1 ~ 128.
Device without an Object ID can not transfer its information to LonWorks.
Object ID does not appear if there are more than 128 indoor units.
52
E-
Advertisement
Table of Contents
