Table of Contents
Advertisement
Before Installing the LonWorks Gateway
4
E-
Checks before installation
1
LonWorks Gateway IP
A public IP is needed to access the LonWorks Gateway
over the internet.
(One public IP is needed for each LonWorks Gateway)
A private IP may be used if the LonWorks Gateway need
not be accessed over the internet.
2
Network related equipments
3
Installation connection wire
The LAN cable and the communication cables from
centralized controllers/
installed in such a way that the wires can be connected
to the LonWorks Gateway with ease.
Note
The LonWorks Gateway is a server and supports
static IP. To access the LonWorks Gateway through the
internet or with BMS System, the LonWorks Gateway
address, which is the IP address, must be known.
A static IP service from an internet service provider
must be used if xDSL (ADSL, VDSL) is being used for
internet connection. (Static IP costs more than dynamic
IP.)
nterface modules must be
i
Advertisement
Table of Contents
