Table of Contents
Advertisement
Connecting SIM
1
Unfasten the 2 screws on the bottom of the LonWorks
Gateway front cover. Hold the bottom 2 sides of the
LonWorks Gateway and push downwards to slide open
the cover.
2
Connect the adapter to the power terminal.
Arrange the adapter as the right figure.
3
Separate 1 terminal block from 5 terminal blocks which
are attached to RS485 communication terminal.
Then, connect SIM communication cable
(C1, C2) to the terminal block. (C1 A, C2 B)
4
Connect LAN cable to the Ethernet terminal of LonWorks
Gateway. Then arrange it using cable tie.
5
Fasten the bottom cover of LonWorks Gateway and fix it
using 2 screws.
Maximum 8 SIM/PIM units can be connected to one LonWorks
Gateway.
Adapter
Connect
communication
cable
Cable tie
LAN cable
15
E-
Advertisement
Table of Contents
