Table of Contents
Advertisement
Tracking (Continued)
3
When each channel is enabled, check the communication mode you want to set
for each channel.
You cannot change the communication mode of channel which has currently
connected device.
When 'NEW' is set as communication mode, setting will allow tracking, monitoring
and controlling devices that support NEW communication mode.
When 'IM' is set as communication mode, setting will allow tracking, monitoring and
controlling SIM/PIM.
4
Click [Save] after setting is completed.
If you click [Cancel], check boxes will be disabled and [Cancel] button will switch to
[Edit].
5
When message with "Reading data from DMS. Please wait" appears saving is
completed. Then, 'System Environment Setting' screen appears again with all items
disabled.
46
E-
Advertisement
Table of Contents
