Table of Contents
Advertisement
Setting the LonWorks Gateway (Continued)
5
Enter ID and password when LonWorks Gateway main web page appears, Then click
[LOGIN].
If you use accounts with general authorization level to login, you cannot use
the LonWorks Gateway settings.
Depending on authorization level set by the administrator, access to some
functions may be restricted.
You can change authorization level settings from System settings
User authorization management.
To use the LonWorks Gateway functions, you must login with the ID that is
included in administration group. Factory default LonWorks Gateway ID is
'admin' and password is 'ac0530' .
Note
Only authorized users can access to web page.
Connection speed may slow down. Fewer than 5 concurrent users are
recommended.
LonWorks Gateway manager should change ID and password for security and
management.
Logout: If you want to logout, click [LOGOUT] on the top of the menu. LonWorks
Gateway will be ended.
If you use accounts with authorization level lower than management group or accounts
with general authorization level, you cannot access LonWorks Gateway settings.
If you cannot access LonWorks Gateway, consult the manager.
22
E-
Advertisement
Table of Contents
