Table of Contents
Advertisement
Device Configuration (Continued)
2
Click [Edit] from the 'Device Information' screen.
3
Enter the new value when the input field activates.
When entering the new value, enter the value complying with NV type form.
New value should be within the allowable range according to NV.
Refer to LonWorks Message Definition for the input format and the allowable range.
4
Click [Save] when setting is completed.
A. When clicking [cancel], texts become inactive and the [cancel] will be switched
to [change].
5
When the message with 'Reading data from DMS. Please wait' and saving is
completed, device information page will be displayed again with all the items
inactivated.
Note
The value of the Input item represents the current status of the device.
Therefore, value may be different from the final status controlled by LonWorks
MMI.
Some values cannot be altered depending on their connection to a type of
device (Indoor unit, ERV, AHU kit).
54
E-
Advertisement
Table of Contents
