3
Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren Lightweight wheelchairs Eclips+ and Eclips+30° has been designed entirely
for your comfort. This wheelchair can be adjusted to individual requirements as explained
below.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1
Tools
To set up the wheelchair the following tools are needed.
Wrench set n° 10 to n° 19
•
Allen key set n° 4 to n° 5
•
Screwdriver Phillips head
•
3.2
Manner of delivery
The Vermeiren Eclips+, Eclips+30° shall be delivere d with:
1 frame with arm supports, rear and front wheels (seat height of 500 mm, seat angle
•
of 7° ) (for Eclips+30° additionally: adjusting syst em 30° back angle)
1 pair footrests
•
Tools
•
Manual
•
Accessories
•
Eclips+, Eclips+ 30°
2011-06