Ironman Fitness 5600 Owner's Manual page 24

How to control the amount of inversion:
1
Push the Lever to the UNLOCKED position.
Control the inversion by using your left hand to
grip the left handle bar on the left handlebar,
while keeping your right hand on the Lever.
How to completely invert 180 degrees
1. Push against the Inversion Bar with
Left arm.
2. Pull the Lever to the Lock Position
Calibrating the iControl Disk Brake
The locking mechanism may lose grip over time. To remedy
this situation calibrate the locking mechanism by inserting the
Philips Screwdriver into the hole as indicated on the diagram.
Turn the Philips Screwdriver clockwise no more than a ¼ turn.
If you need help, contact customer service.
HOW TO USE
2
When at the desired angle, pull the Lever to
the LOCKED position to lock the bed in place.
22
Pull Lever to
2
LOCK position.
Push against the
1
Inversion Bar with left arm.