Adam Equipment HCB 123 Manual page 29

COPY
Input command format:
The scale can be controlled with the following commands. The commands must be
sent in upper case letters, i.e. "T" not "t".
T<cr><lf> Tares the scale to display the net weight. This is the same as pressing [->0/T<-]
key.
Z<cr><If> Sets the zero point for all subsequent weighing. Display shows zero.
T5.345<cr><if>
Would be same as entering a preset tare value of 5.345 from keypad
P<cr><lf>
Prints the results to a PC or printer using the optional RS-232 interface. It also
adds the value to the accumulation memory if the accumulation function is not
set to automatic.
© Adam Equipment Company 2016
29