Default Settings - 3Com SuperStack 3 4400 SE 3C17206 Getting Started Manual

Superstack 3 4400 series
Hide thumbs Also See for SuperStack 3 4400 SE 3C17206:
Table of Contents

Advertisement

20
C
1: I
HAPTER
NTRODUCING THE

Default Settings

S
S
3 S
UPER
TACK
WITCH
Table 5 shows the default settings for the Switch 4400:
Table 5 Default Settings
Feature
Automatic IP Configuration
Port Status
Port Speed
Duplex Mode
Power over Ethernet
Flow Control
Broadcast Storm Control
Virtual LANs (VLANs)
Management VLAN
Trust IP
Link Aggregation Control
Protocol (LACP)
IP Multicast Filtering
Rapid Spanning Tree Protocol Enabled
Fast Start
RMON Alarm
Smart Auto-Sensing
Webcache Support
Traffic Prioritization
Port Security
Configuration Save and
Restore
4400
Switch 4400
Enabled
Enabled
10/100 Mbps ports are auto-negotiated
MT-RJ ports (3C17210) are fixed at 100 Mbps
All fixed 10BASE-T and 100BASE-TX ports are
auto-negotiated
100BASE-FX ports default to full-duplex mode
(100 FD) and must be manually set to half-duplex
mode (100 HD) if required.
Enabled (3C17205 only)
Enabled in half-duplex mode
Auto-negotiated in full-duplex mode
Enabled
All ports belong to the untagged Default VLAN
(VLAN 1) with IEEE Std 802.1Q-1998 learning
operational
VLAN 1
Disabled
Disabled per port
Filtering enabled
Enabled on front panel ports
Disabled on rear panel port
Enabled
Enabled
Disabled
All ports prioritize NBX VoIP traffic (LAN and IP).
All ports set to "best effort" for all other traffic.
Disabled per port
Disabled

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents