About The Switch 4400; Summary Of Hardware Features - 3Com SuperStack 3 4400 SE 3C17206 Getting Started Manual

14 C 1: I
HAPTER NTRODUCING THE
About the Switch
4400
Summary of
Hardware Features
S S 3 S
UPER TACK WITCH
The Switch 4400 is a stackable 10/100 Mbps Ethernet switch and
provides high-performance workgroups with a backbone to server
connection. The Switch 4400 allows Cascade, Gigabit Ethernet or Fast
Ethernet Fiber connections when expansion modules are installed in the
expansion slots on the rear of the unit. You can also add the Switch 4400
to any SuperStack ® system as your network grows.
The Switch 4400 PWR (3C17205) supports Power over Ethernet on all
front panel ports. If you plug in a compatible (IEEE 802.3af compliant)
device, it will be automatically detected and power supplied to it. Power
over Ethernet is enabled on each port by default.
The Switch 4400 FX (3C17210) has 24 100BASE-FX MT-RJ ports. These
allow easy connection of 100 Mbps fiber-optic links.
Table 3 summarizes the hardware features that are supported by the
Switch 4400.
Table 3 Hardware features
Feature
Addresses
Auto-negotiation
Forwarding Modes
Duplex Modes
Flow Control
Smart Auto-sensing
Traffic Prioritization
Power over Ethernet
Ethernet and Fast Ethernet
Ports
RPS Support
Mounting
Stacking
4400
Switch 4400
Up to 8000 supported
■
Up to 64 permanent entries
■
Supported on all ports
■
Auto MDI/MDI-X (not 3C17210)
■
Store and Forward
Half and full duplex on all front panel ports
In full duplex operation all ports are supported
Supported on all ports
Supported (using the IEEE Std 802.ID, 1998 Edition):
4 queues per port
Supported on all front panel ports (3C17205 only).
Auto-negotiating 10BASE-T/100BASE-TX ports or
100BASE-FX ports (3C17210)
Connects to SuperStack 3 Advanced Redundant
Power System (ARPS) (3C16071B)
19-inch rack or stand-alone mounting
All Switch units in the stack can be managed as a
single entity with one IP address