2.3
Baby unit installation
Install the baby unit as shown below.
Make sure that the power outlet is not controlled by a wall switch. Bundle
the power cord neatly with the self-adhesive strap.
Raise the antenna for better
reception.
Notes
•
The baby unit power adapters are intended to be correctly oriented in a vertical
or floor mount position. The prongs are not designed to hold the plug in place if
it is plugged into a ceiling, under-the-table or cabinet outlet.
•
Make sure the baby units and the power adapter cords are out of reach of
children.
Power outlet not
controlled by a wall
switch
Baby unit
Self-adhesive strap
6
Baby unit power
adapter