Maintenance; Recommended Maintenance Schedule(S) - Toro TimeCutter Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
Before each use or daily
After each use
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 500 hours
Before storage
Important:
Refer to your engine owner's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you perform any maintenance.
Maintenance Procedure
• Check the safety-interlock system.
• Check the air cleaner for dirty, loose or damaged parts.
• Check the engine-oil level.
• Inspect the blades.
• Clean the mower-deck housing.
• Grease all lubrication points.
• Check tire pressure.
• Check the belts for wear or cracks.
• Service the air-cleaner paper element (more often under extremely dusty, dirty
conditions).
• Replace the air-cleaner paper element (more often under extremely dusty, dirty
conditions).
• Change the engine oil and the engine-oil filter.
• Clean the blower housing (more often under extremely dusty, dirty conditions).
• Replace the in-line fuel filter.
• Check the spark plug(s) condition and gap.
• Replace the spark plug(s).
• Charge the battery and disconnect the battery cables.
• Perform all maintenance procedures listed above before storage.
• Paint any chipped surfaces.
26