Table of Contents
Advertisement
DEVICE INSTALLATION AND CONFIGURATION
Device installation
The device can be installed on the wall or to cover the 3-module flush-mounting box
(type 503).
We recommend positioning at a height of 1.5 meters from the floor, in an area that
respects as much as possible the average temperature conditions of the entire
environment. Make sure that the distance between the Access Point and the device is
such as to guarantee stable communication.
Avoid installation near doors or windows, in niches, behind doors and curtains or
in positions with excess or total lack of ventilation, to avoid that the reading of the
temperature measured by the probe is in some way offset.
Preliminary operations
If you intend to use the device by remote control, before proceeding with the
installation and configuration make sure you have a Vemer account available.
To create a Vemer account, proceed as follows:
1. Install and start the Vemer "Clima Wi-Fi"
app on your smartphone
2. Tap on "Register": enter a valid e-mail address
and a password (for security reasons it is
advisable to choose a password other than
the one used for the personal e-mail box)
3. Check your e-mail box: click on the link
contained in the e-mail received
to confirm account activation
4. Log in by entering the e-mail
and password chosen during registration
- 44 -
Tuo Wi-Fi Batteria Chronothermostat User Manual
Advertisement
Table of Contents
