Performing Video-Related Operations During A Call; Two-Stage Dialing; Initiating Another Call While On A Call - Huawei eSpace 8950 User Manual

eSpace 8950 IP Phone
User Guide

6.3.4 Performing Video-Related Operations During a Call

During a call, you can tap
6-2.
Table 6-2 Video-related operations
If You Want to...
Switch an audio call to a
video call
Switch a video call to an
audio call
Stop video
Start video
Switch between the
small and large video
panes
Disable self-video (local
video preview)
Enable self-video (local
video preview)
Move the small video
pane

6.3.5 Two-Stage Dialing

Two-stage dialing is usually used in interactive voice response (IVR). For example, when you
call a customer service center, you can hear the system announcements. Then, you dial a number
as prompted.
Step 1 During a call, tap
Step 2 On the two-stage dialing screen, enter digits as prompted.
----End

6.3.6 Initiating Another Call While on a Call

Issue 03 (2014-10-16)
In the handset or speaker mode, tap
At the time, is displayed in the call control area.
.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
. eSpace 8950 is then switched to the headset mode.
and then perform video-related operations described in
Then...
Tap Video Call. After your peer accepts your video call request,
you can see each other's video.
Tap Audio Call. Then, the video call screen is closed, and the
audio call screen is displayed.
Tap Stop Video. Your IP phone stops your local camera, and your
peer can no longer view your video.
Tap Start Video. Your IP phone starts your local camera, and
your peer can view your video.
Tap Switch. Then, the two video panes on the screen are switched.
Tap Close Self-Video. Then, your local video is stopped.
Tap Show Self-Video. Then, your local video is started.
Drag the small video pane to the desired location.
6 Call
Table
31