Huawei eSpace 8950 User Manual page 93

eSpace 8950 IP Phone
User Guide
Step 2 Tap
Step 3 Enter the alarm time and tap OK.
If you have set the system time of eSpace 8950 as 12-hour time, you need to select AM or PM when setting the
alarm time.
The alarm you have set is displayed on the Alarms screen.
l To enable or disable an alarm
l To edit the alarm time
l To add a label for an alarm
l To set repeated alarm time
l To change the alarm sound
----End
Setting the Alarm Sound Parameters
Step 1 On the Alarms or Clock screen, tap and select Settings.
Step 2 In the ALARMS area, tap and set the alarm parameters you want to modify.
l Silence after
l Snooze length
l Alarm volume
l Volume buttons
----End
Deleting an Alarm
Step 1 Tap and hold an alarm until it turns blue.
Step 2 Tap
Step 3 In the dialog box that is displayed, tap OK.
----End
Issue 03 (2014-10-16)
in the upper right corner of the screen.
NOTE
Tap the enable/disable switch on the right side of an alarm.
Tap the alarm time you want to edit, and enter the time you want.
Tap the arrow under the enable/disable switch, tap Label, and enter the label name you prefer.
Tap the arrow under the enable/disable switch, select REPEAT, and set the alarm time.
Tap the sound name and select the sound you prefer.
Select the duration of the alarm sound.
Select the alarm snooze duration.
Adjust the alarm volume.
Select the operation that you want the volume buttons to execute: snooze, stop, or no
operation.
in the upper right corner of the screen.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
26 Applications
85