Camera; Storage - Huawei eSpace 8950 User Manual

eSpace 8950 IP Phone
User Guide
Setting Phone Display on the Web Page
To set your IP phone to automatically adjust the brightness
Step 1 On the web page, choose System > Power Saving.
Step 2 In Auto Brightness, set the amount of time for your IP phone to be idle before your IP phone
automatically adjusts the brightness.
Step 3 Click Save.
----End
To set phone sleep mode
Step 1 On the web page, choose System > Power Saving.
Step 2 In Sleep After, set the amount of time for your IP phone to be idle before your IP phone
automatically goes to sleep.
Step 3 Click Save.
----End
To import a wallpaper
Step 1 On the web page, choose Preferences > Wallpaper.
Step 2 Click Import and select a wallpaper you want to import.
On the web page, you can import .png, .bmp, and .jpg wallpapers to your IP phone, but you cannot set phone
wallpapers. Each wallpaper cannot exceed 10 MB.
----End

27.2.3 Camera

Step 1 Tap
Step 2 In the DEVICE area, tap Camera.
The camera settings screen is then displayed. On this screen, you can set the following
parameters:
l Parameter Settings: Adjust the video image brightness, contrast, and digital zoom of the
l View Status: Check the camera information, including its software, Uboot, and hardware
l Camera Factory Reset: Restore the camera to its factory defaults.
----End

27.2.4 Storage

You can view the IP phone's internal storage space as well as SD card and USB device storage
information.
Issue 03 (2014-10-16)
NOTE
. On the APPLICATION tab, tap Settings.
camera.
version information.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27 Settings
96