Touchscreen Experience - Huawei eSpace 8950 User Manual

eSpace 8950 IP Phone
User Guide
Installing Your USB Camera
Step 1 Take the camera out of the plastic bag.
Step 2 Remove the back cover of your phone and connect the camera to the USB camera port.
Only the USB camera provided for eSpace 8950 can be connected to the USB camera port.
----End
Understanding the Camera LED
l
l
Previewing Your Video
You can preview the video of yourself when eSpace 8950 is idle or engaged in a call.
l
l
Maintaining Your Camera
l
l
l

1.2 Touchscreen Experience

Do not use any sharp object to touch the screen or tap the screen too hard with your fingertip;
otherwise, the touchscreen may be damaged.
Tap
Touch the object once. For example, tap to select or open an application.
Issue 03 (2014-10-16)
NOTE
If the camera LED is steady red, the camera is being connected. The camera LED will be
off after the camera is successfully connected and initialized.
If the camera LED is steady blue, video is being shot.
When the phone is idle, tap
how to add Quick Setting, see
If your phone is engaged in a video call, you can also preview your video during the video
call.
NOTE
l During video preview, you can adjust the camera angle to adjust your video image. The supported
angle ranges from –25° to +15°.
l You can also adjust the brightness, contrast, and digital zoom of your camera as required. For detailed
settings, see 27.2.3 Camera.
Do not frequently remove and reseat your camera. The frequent reseat operations may cause
poor contact of the USB camera port.
Do not use rough, unclean materials to wipe the lens. If you do so, the lens' image quality
may be affected.
Close the shutter to protect your camera if you do not use it, or remove the camera and seal
it in a plastic bag with desiccant if the camera is not to be used for a long time.
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
in Quick Setting to preview your video. For details about
26.1.3 Quick Setting.
1 Getting Started
5