Huawei eSpace 8950 User Manual page 84

eSpace 8950 IP Phone
User Guide
Table 25-5 Group conference
If You Want to...
Add a participant
Change an audio
conference to a
video conference
Enable or disable
local video
Display video in
full screen
Change the display
sequence of a
participant
Mute a participant
View the details of
a participant
Mute or unmute
yourself
Delete a participant 1. Tap the profile picture of a participant.
End a conference
Issue 03 (2014-10-16)
Then...
1. On the conference screen, tap
2. Add a participant.
3. Tap OK.
NOTE
eSpace 8950 supports a maximum of six group conferences, with each
conference supporting a maximum of 20 participants. If more than 20
participants are in the participant list, only the first 20 participants can join
the conference.
1. Tap .
2. Tap Video Conference.
1. Tap .
2. Tap Stop Video or Start Video.
1. Tap a participant in the participant list.
2. Tap Full Screen.
1. Tap a participant in the participant list.
2. Tap Replace and tap the replacing participant.
1. Tap the profile picture of a participant.
2. Tap Mute.
NOTE
To unmute a participant, tap Unmute.
1. Tap the profile picture of a participant.
2. Tap Details.
l To mute yourself: Press
l To unmute yourself: Press
2. Tap Delete.
3. In the dialog box that is displayed, tap OK.
1. Tap .
2. In the dialog box that is displayed, tap End.
NOTE
l The conference initiator can tap
l Participants can tap
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
to access the dialing screen.
or tap while on a call.
or tap while in the mute state.
to end the conference.
to quit the conference.
25 Conferences
76