Call Forward; Local Conference; Other Functions - Huawei eSpace 7910 Quick Start Manual

拨打电话
Placing a Call
You can place a call in any of the following ways:
Directly dialing a number
- Pick up the handset or press
Dial a number and press
- Dial a number and pick up the handset or press
Using the call history
,select a record, and press the Call softkey.
Press
Using contacts
,
Press select a record, and press the Call softkey.
Answering a Call
接听电话
You can respond to a call in any of the following ways:
Answering a call: Pick up the handset or press
the Answer softkey .
Transfering a call: Press the Transfer softkey, enter
the destination number, and press the Transfer softkey .
Rejecting a call: Press the Reject softkey.
Ignoring a call: Press the Ignore softkey.
Call Hold
You can perform the following operations during a call:
Press or the Hold softkey to hold a call.
Press or the Resume softkey to resume a call.
Call T ransfer
You can transfer an ongoing call to a third-party.
Blind transfer
Press or the Transfer
number and press
Semi-consult transfer
Press or the Transfer and enter the destination
number . After hearing a
press or the Done softkey.
Consult transfer
Press or the Transfer and enter the destination
number. After the other party
press or the Done softkey.

Call Forward

You can forward a call to a preset forward-to number
whenever necessary. To set call forward:
1. Press the navigation buttons and
Preferences > Call Settings
of the phone.
2.
Select Call Forward and press the Modify softkey.
3.
Select the desired call forward mode and press the
Select softkey.
4.
Select Number and press the Select softkey.
5.
Enter the destination number and press the Done
softkey.
.
or the Call softkey.
and enter the destination
or the Done softkey.
ringback tone,
picks up the phone,
choose Apps >
on the home screen
免打扰
DND
You can use the Do Not Disturb (DND) feature to
prevent incoming calls from ringing your phone.
To enable DND
Press the DND softkey. The phone screen displays
and the message"
.
To disable DND
Press the DND softkey again. The phone screen no
longer displays

Local Conference

You can hold a three-party local conference call. A
local conference call involving a maximum of six
participants is supported. .
1. During a call (for example, with user B), press
or the Conf softkey and dial the number of another
or
user (for example, user C).
2. After a call with user C is set up, press the Join
softkey to implement a three-party conference
call.
After a three-party conference call is set up, you can
invite more users to the conference. Specifically, press
the Add softkey, dial the number of another user (for
example, user D), and after a call with user D is set up,
press the Join softkey.
You can also perform conference control operations
such as muting a participant, removing a participant
from a conference, and ending a conference.

Other Functions

Corporate Directory
After the corporate directory is configured, you
can use your phone to query the corporate contact
information in real time.
Linkage
After your phone is
Desktop, you can perform call operations such as
placing a call, answering a call, and hanging up
using the eSpace Desktop.
One-key Switch
The IP Phone supports one-key switch, allowing
users to switch calls between the IP Phone and
any other bound IP phone or mobile phone.
NOTE
For details, see the IP Phone User Guide or contact
your system administrator.
Q&A
Q: I can hear a voice coming from the speakerphone
but I cannot hear anything from the handset. Why?
A: The handset cord may be connected to the incorrect
port or the connection between the handset cord and
the handset port may be loose.
Q: How can I view basic phone information, such as
the IP address?
A: Choose Apps > Status on the home screen of the
phone. You can view basic phone information
on this screen.
Qualification Card
Inspector:
DND enabled".
or the message" DND enabled".
linked to the eSpace
pass