Indoor unit setting
1. Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
2. The address of the indoor unit is assigned by adjusting MAIN(SW01, SW02) and RMC(SW03, SW04) rotary switches.
❋ ❋ The designs and shape are subject to
change according to the model.
Setting Main Address
f The MAIN address is for communication between the indoor unit and the outdoor unit. Therefore, you must set it to
X
operate the air conditioner properly.
f You can set the MAIN address from '00' to '99' by mixing SW01 and SW02. The MAIN address from '00' to '99' should differ
X
from each other.
f Check the indoor unit address on the plan that you are to install and set the address according to the plan.
X
• You may not need to set main address if you selected Auto Address Setting from the outdoor unit: see details on
the outdoor unit installation manual.
NOTE
ex) When MAIN address is set as "12".
Setting RMC Address
f The SW03 and SW04 RMC switch is the address setting switch for controlling the indoor unit with the centralized
X
controller.
f You must set the SW03, SW04 and K2 switch when using the centralized controller.
X
f You don't have to set the SW03 and SW04 RMC switch when not using the centralized controller.
X
ex) When MAIN address is set as "12".
SW03
SW04
32
Big Duct_IBIM_E_33766-3.indd 32
SW01
SW02
SW03
SW05
SW06
SW07
SW04
2012-01-13 오후 9:40:33