Drain Pipe And Drain Hose Installation - Samsung ND220HHXCE User & Installation Manual

Drain pipe and drain hose installation

Care must be taken when installing the drain hose for the indoor unit to ensure that any condensate water is correctly
drained outside. The drain hose can be installed to the right or left side of the base pan.
1. Unscrew the 4 tapped screws to remove the cover of the drain hose
connection port.
2. Insert the flexible hose to the drain hose port.
• Fix the flexible hose to the indoor unit with the supplied cable
clamp securely. (Use the screwdriver to fix the flexible hose securely.)
NOTE
3. Install the drain hose so that its length can be as short as possible. Internal
diameter of the drain hose should be the same or slightly bigger than the
external diameter of the drain hose port.
• Inner diameter of the drain hose
• Give a slightly slant to the drain hose for proper drainage of
condensate.
NOTE
• Fix the flexible hose to the PVC with the supplied cable tie securely.
4. Wrap the drain hose with the insulation drain as shown in figure and secure it.
24
Big Duct_IBIM_E_33766-3.indd 24
1/4inch(32mm)(Inner diameter)
Drain hose connection port
Cable Clamp
Cable Tie
Indoor
Unit
Cable hose
Flexible hose
Insulation
• Must fit tightly against
body without any gap.
CAUTION
No gap
2012-01-13 오후 9:40:30