Setting The Indoor Unit Tenants For Each User - Samsung Wi-Fi Kit 2.0 MIM-H04NDZ User & Installation Manual

Table of Contents

Advertisement

Installing the Wi-Fi Kit
6. Activate the Wi-Fi Kit.
• When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely.
• After the system operates, tracking is performed automatically.
7. Tracking
※ Tracking: The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the
Wi-Fi Kit. Tracking is required to monitor or control the system air conditioner using the Wi-Fi Kit.
F1
F2
V1 V2
F3 F4
• The Wi-Fi Kit automatically performs tracking when activated. The (
blink while in tracking.
• When any change in the installation of indoor and outdoor units occurs, manually run the tracking by
pressing the (SW3,
• To control indoor units by using a mobile phone, wait until the tracking is completed and then connect
the Wi-Fi Kit to a wireless router.
NOTE
• The (AP) indicator does not turn off until the Wi-Fi Kit is connected to a wireless router after tracking.

Setting the indoor unit tenants for each user

• The multi-tenants feature allows you to control and monitor the indoor units with the group channel
address (RMC1) that is the same as that of the Wi-Fi Kit.
NOTE
In order to selectively use the indoor units connected to a single outdoor unit by multiple users,
you can install multiple Wi-Fi Kits and group the indoor units by setting the group channel address (RMC1) for each Wi-Fi Kit.
S-NET pro 2
Setting the group channel
address (indoor unit) and
tenant address (Wi-Fi Kit)
1. Install a separate Wi-Fi kit for each group. Example: if you have 3 separate groups/tenants, you must
install 3 Wi-Fi kits.
• You can connect up to 16 Wi-Fi Kits to a single outdoor unit.
• When installing multiple Wi-Fi Kits, connect and perform tracking one by one.
CAUTION
(For example, connect and perform tracking on Wi-Fi Kit #1 → connect and perform tracking on Wi-Fi
Kit #2 → ... → connect and perform tracking on Wi-Fi Kit #16.)
• If you connect multiple Wi-Fi Kits and perform tracking on them at the same time, you will not get
reliable results.
12
-
) button inside the Wi-Fi Kit.
Group channel address 1
Tenant address 1
Hair salon
) (
2
Tenant address 2 Tenant address 3
Café
Grocery store
) indicators on the Wi-Fi Kit
3

Advertisement

Table of Contents
loading

Table of Contents