Table of Contents
Advertisement
4
Introduction
This User Manual applies to the AutoGRAPH-ST autonomous anti-thief device
(hereafter - device, AutoGRAPH-ST) produced by TechnoKom Ltd. It contains
installation and connection procedures of this device, as well as its function
and control. This Manual constitutes the Operating Rules to be observed to
ensure successful operation of the controller and its compliance with TU 6811-
004-12606363-2013 and warranty provisions.
All information on functions, functional capabilities and other specifications related to
AutoGRAPH-ST tracking devices as well as all information contained in this User Manual is based
on current data (at time of writing) and is deemed to be valid as of the date of publication.
IMPORTANT
TechnoKom reserves the right to modify the information or specifications without prior notice
or commitment.
Basic information
• AutoGRAPH-ST is an autonomous anti-thief device intended for acquisition
of the exact coordinates of assets and delivery of the coordinates to the
customer by SMS, Email and GPRS.
• The customer can track asset in real-time using the AutoGRAPH-Web
application.
• The compact form factor makes the device easy to install and difficult to
detect.
• The autonomous power supply is enough to send 1200 messages. Under
normal usage the battery life time is up to 2 years.
• Operation of the device is organized in such way that the device is in
Standby mode most of time. The AutoGRAPH-ST switches to Operation
mode for acquisition of asset coordinates and delivery to the customer.
The device will then switch to Standby mode until next period of Operation
mode. First of all such behaviour extends battery life time. Secondly, it makes
detection by GSM/GPS scanners more difficult by limiting operational time.
TechnoKom © 2015
AutoGRAPH-ST
•
USER MANUAL
Advertisement
Table of Contents
