Table of Contents
Advertisement
17
AutoGRAPH-ST
•
USER MANUAL
Current position coordinates can be sent to the customer by SMS and Email.
Along with the coordinates, the device sends speed, battery voltage level,
ambient temperature, number of visible satellites, positioning accuracy in
case of fixing using LBS and total number of SMS sent at last switch on. The
device is able to send SMS messages to 3 different telephone numbers and
Email messages to 4 addresses in one period of Operation mode.
Coordinates can be send to the customer as a link to the online mapping
service (Google Maps or Yandex Maps) or the customer can set up the
AutoGRAPH-ST to send longitude and latitude values without a link.
Motion detection
Depending on the hardware version, AutoGRAPH-ST devices may be
equipped with a built-in accelerometer.
The accelerometer can detect motion, device overturning and impact effects
on the device and notify the customer. To provide quick notification, the device
sends first SMS without coordinates and after position acquisition it sends
second SMS with asset coordinates.
To check whether the device has an accelerometer, the customer can use the
AGSTConf program or send an SMS request to the AutoGRAPH-ST.
Additional functions
• Delay of Standby mode. This allows the device to stay in Operation mode
after sending an SMS for a specified amount of the time between 3 and 10
minutes. This can be used for sending new settings to the device after it has
switched to Operation mode and sent it's current position data by SMS.
• Balance inquiry. The device can be set up to send the balance of the
SIM card to the customer in the SMS and Email with the coordinates. The
customer can check the balance of the SIM card themselves by sending a
control command to the device. The device can also be set up to send a
notification if the balance falls below a preset amount.
TechnoKom © 2015
Advertisement
Table of Contents
