Table of Contents
Advertisement
AutoGRAPH-ST
•
Settings
When shipping, the device is set to the manufacturer's default settings. After
inserting a SIM card and battery, the device is fully operational. If necessary, a
customer can set up the device with personalised settings.
The device is fully configurable for any requirements and it can be set up in
following way:
• using the AGSTConf program that is intended especially for configuring
AutoGRAPH-ST devices via USB.
• remotely by sending control commands in SMS.
The device settings are secured with a password. The default security
password is specified in password card supplied with the device.
To ensure security of the device, it is highly recommended that the security password is changed
IMPORTANT
from that specified by the manufacturer upon purchase.
When the device is secured with a password, it is not possible to change the
settings with the configuration program without entering the correct password.
A password is also required when using the SMS control commands.
Apart from the four digit security password, every AutoGRAPH-ST device has
a 16 digit master password, which enables a reset of the security password
in case of its loss.
The master password of the device is given in the password card supplied
with the device. The master password cannot be changed.
To avoid unauthorized access to the device settings and data stored in device, it is not
recommended to disclose device passwords. It is highly recommended to keep the password card
IMPORTANT
in a secure place away from the device.
USER MANUAL
13
TechnoKom © 2015
Advertisement
Table of Contents
