Table of Contents
Advertisement
AutoGRAPH-ST
•
Profiles
The AutoGRAPH-ST has five standard profiles which customize the device for
different applications. Each profile customizes settings such as transmission
time or period and methods. At specified intervals or at a scheduled time the
device acquires its location and sends the location data to the customer. After
sending the SMS the device stays in Operation mode for a preset amount of
time before returning to Standby mode. During the delay the device is able
to receive and process incoming control commands. The delay time can be
between 3 and 10 minutes. The default value is 5 minutes which should be
enough for the customer to send new settings or select a different profile.
SLP (SLeeP)
The SLP profile is the most power saving profile. In this mode the device
acquires its position at specified intervals, then records the coordinates into
memory, and doesn't transfer the data to the customer. After data recording,
the device can stay in Operation mode for a preset duration. The default
location acquisition period is 24 hours. The period can be customized by
means of short SMS command - SLP. The period can vary from 1 to 648
hours with accuracy of 1 hour.
SLP profile may be used to disable temporarily data transmission (e.g. when
asset is in roaming).
i
Position fixing using LBS is not available in SLP profile. If GNSS satellites are not available, the
NOTE
device will not acquire location data and after the delay time will return to Standby mode.
USER MANUAL
19
TechnoKom © 2015
Advertisement
Table of Contents
