Table of Contents
Advertisement
AutoGRAPH-ST
•
Drivers Installation
This section covers the installation procedure of the AutoGRAPH-ST device
drivers. For the proper operation of AutoGRAPH-ST devices, the AGUSB
Drivers must be installed in system.
i
AutoGRAPH-ST drivers can be downloaded for free from the official web site of the manufacturer
NOTE
(www.tk-chel.ru).
i
AutoGRAPH-ST drivers are compatible with Microsoft Windows XP, 7, Vista, 8, Server 2003, Server
NOTE
2008 and Server 2012.
To install the device drivers onto a Microsoft Windows 7 OS:
1. Connect the device to a PC. If automatic drivers installation is enabled,
drivers for the AutoGRAPH-ST device will be automatically downloaded
from the Windows Update server and installed in system. If the automatic
drivers installation is disabled, install the device drivers manually. To do it,
follow the next steps:
2. Download the archived drivers folder from the official web site of the
manufacturer and extract the files to a temporary directory on a hard drive.
3. Connect AutoGRAPH-ST device to your PC using USB AM - USB
microB pin5 interface cable.
4. The system automatically searches for new equipment. Launch the
driver update wizard for new equipment.
5. Select "Browse my computer for driver software" option and browse to
the location where the drivers are saved.
6. When the drivers are installed, the system will automatically identify
the connected device. The device is now ready to operate with the
configuration utility and dispatch software.
USER MANUAL
23
TechnoKom © 2015
Advertisement
Table of Contents
