Network Camera Viewer - Panasonic KX-HDV430 Operating Instructions Manual

3.10.2 Network Camera Viewer

•
Linked Numbers
Enter the names and phone numbers to associate with the Network Camera so that the video feed
automatically displays when making or receiving a call. You can make up to 5 entries (name: max. 24
characters, phone number: max. 32 characters).
–
To select a number from the phone book: Tap
–
To select a number from the call history: Tap
•
Stream
Select "Stream 1" or "Stream 2" if the Network Camera is configured to output multiple streams. For
details, refer to your Network Camera's documentation.
3.10.2 Network Camera Viewer
Starting Network Camera Viewer
1.
In standby mode, tap
Note
•
The video feed of the Network Camera to which you most recently connected is displayed.
•
No video feed is displayed if no Network Cameras have been registered.
Closing Network Camera viewer
1.
Press /
HOME
Selecting a Network Camera
1.
In standby mode, tap
2.
Press / MENU
3.
Tap "Camera Selection".
4.
Tap or : Select the desired camera name, and then tap "OK".
Controlling a Network Camera
[While displaying a video feed from a Network Camera (operation screen)]
Centering: While the status bar and operation area are displayed on the screen, tap the spot where you
want to center the video feed.
Perform the following steps to pan, tilt, zoom in/out, or move to the camera's home position.
1.
Tap the screen to display the icons before performing the following operations.
2.
Do one of the following.
a.
To pan, tap
b.
To tilt, tap
c.
To zoom in, tap
d.
To zoom out, tap
e.
To move to the camera's home position, tap
Depending on the Network Camera, this feature may not be available.
*1
82 Operating Instructions
or , and then select "Network Camera".
or / , and then tap "OK".
CANCEL
or , and then select "Network Camera".
.
*1
or .
or .
.
.
.
.
.
Document Version: 2017-08