Note
•
If an icon is grayed out, that feature is not available.
Switching Automatically among Multiple Network Cameras
You can automatically cycle through the video feeds from registered Network Cameras at a set time interval.
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Camera Selection".
3.
Tap "Sequential".
To stop switching
1.
While switching, press /
2.
Tap "Camera Selection".
3.
Tap any camera name.
Note
•
The order in which video feeds are displayed follows the order in which the Network Cameras are
registered.
Interval switching settings
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Camera Selection".
3.
Press /
MENU
4.
Tap "Sequential Interval".
5.
Tap
or
: Select the desired item, and then tap "OK".
3.10.3 Using Phone Numbers Associated with a Network Camera
Paging Number
Paging can be performed using a phone number (Paging Number) associated with a Network Camera.
[While displaying a video feed from a Network Camera (operation screen)]
1.
Tap the screen.
2.
Tap
.
Note
•
A call is a voice call using the speakerphone from the default line.
Linked Number
The video feed of the Network Camera can be viewed by making or receiving a call using a phone number
(Linked Number) associated with the Network Camera.
Document Version: 2017-08
.
.
MENU
.
.
3.10.3 Using Phone Numbers Associated with a Network Camera
Operating Instructions
83