Bluetooth Problems; Obtaining Technical Support - Topcon BR-1 Operator's Manual

Troubleshooting
The BR-1 is not transmitting data (corrections).
Check the Bluetooth LED. The LED will be blue when a
connection has been established.
Check the serial cable connections. The connectors should be
securely plugged in.
Check that the port settings (Port A and Port B) are setup as
RTCM output mode.

Bluetooth Problems

The following are some of the most commonly encountered problems
with the BR-1.
Cannot connect to BR-1 via Bluetooth.
Check the Bluetooth setting. If there is a PIN setting, use the
BR-1 Bluetooth PIN for the device PIN.
The BR-1 is no longer connected via Bluetooth.
Check the Bluetooth LED. The LED will be blue when a
connection has been established.
Check the connection at the other device.

Obtaining Technical Support

If the troubleshooting hints and tips in this Operator's Manual fail to
remedy the problem, contact TPS Customer Support.
Before contacting TPS Customer support about any problems with
the unit, see "Check This First!" on page 4-1 for some solutions that
may fix the issue.
4-4
BR-1 Operator's Manual