Luxul AMS-1208P Quick Install Manual
  1. Manuals
  2. Brands
  3. Luxul Manuals
  4. Switch
  5. AMS-1208P
  6. Quick install manual

Luxul AMS-1208P Quick Install Manual

Av series, 12-port / 8 poe plus gigabit managed
Hide thumbs Also See for AMS-1208P:

Advertisement

Table of Contents

QUICK INSTALL GUIDE

AV Series
12-Port/8 PoE+ Gigabit

Managed Switch

AMS-1208P
Includes:
AMS-1208P 12-Port/8 PoE+ Switch
„
(Includes Rack Mount Kit and Power Cord)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMS-1208P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Luxul AMS-1208P

Summary of Contents for Luxul AMS-1208P

  • Page 1: Quick Install Guide

    QUICK INSTALL GUIDE AV Series 12-Port/8 PoE+ Gigabit Managed Switch AMS-1208P Includes: AMS-1208P 12-Port/8 PoE+ Switch „ (Includes Rack Mount Kit and Power Cord)

  • Page 2: Installation And Setup

    INSTALLATION AND SETUP Physical Installation The AMS-1208P can easily be installed in a standard 19” rack. Two mounting ears are included for installing and stabilizing the switch. When attaching the mounting ears and installing the switch in a rack, please refer to the following illustration:...

  • Page 3: Network Cabling

    Ports 9 and 10 are Gigabit Ethernet only (non PoE), while ports 11 and 12 are Gigabit SFP ports. Use the included power cable to connect the AMS-1208P to a surge- protected outlet. The AC input socket is on the rear panel. The built-in power supply supports 100~240VAC at 50/60Hz.

  • Page 4: Getting Connected

    Preparing for Access IP Addressing If the AMS-1208P is connected to a network with a 192.168.0.X address scheme, and your computer shares a similar address on the same network, you can skip to the next step, Access and Setup .

  • Page 5: Hardware Operation

    AMS-1208P Front Panel View Rear Panel The rear panel of the AMS-1208P Switch includes 1 console port, 10 Gigabit RJ-45 ports and 2 Gigabit SFP ports, as well as LED status indicators for each port. A mode/reset button switches the display between Link/Activity and PoE modes, while the Blue/Green toggle switches the front-panel LED indicator color.

  • Page 6: Led Indicators

    Mode/Reset Button to Change LED Functionality Tapping the Mode/Reset button briefly switches the port indicators between displaying port link speed and PoE status. The following chart shows the LED indicators of the AMS-1208P along with an explanation of the indicator’s properties: Indicator...
  • Page 7 Link/Act and PoE LEDs turn off, then release the Reset button and the switch automatically restores factory default settings and reboots. Once the System LED starts flashing again, the AMS-1208P is running with factory defaults. CAUTION: Please note that restoring Default Settings will remove...

  • Page 8: Technical Support

    Luxul product. © Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and registered trademarks are property of their respective holders.

Table of Contents