Figure 6-4 Positioning The System - HP A1896A Installation Manual

System Servicing
Removing the System for Servicing
4. Remove the three screws connecting the rear of the base plate assembly to the rear of
the component chassis (see Figure 6-4).

Figure 6-4 Positioning the System

5. Lift and remove the system from the base assembly.
The system weighs as much as 100 lbs and may cause strain if lifted by one
CAUTION
person. Use two people to lift and remove the system.
6. Perform additional servicing as required.
7. Replace the system in the cabinet (see "System Replacement").
6-4 Chapter 6