Samsung DECT 500 Installation And Programming Manual page 42

The Serial Number of the Master handset (channel 00) is displayed.
4. Press the > key and enter the serial number of the new handset (found inside
the handset on the label under the battery).
The handset is registered to channel 01.
5. Press the OK key.
The handset asks for an extension number.
6. Enter the extension number. This can be the existing extension number for the
corded phone being paired with the handset, or any number available in the
PABX if the handset is being used as the only phone.
7. Press the OK key.
The new handset is now registered in the system. To register more handsets, press
the < key to return to the registration menu and follow the same procedure.
Deleting a Registered Handset
To delete the Master handset, use the CCFP administration program. To delete an
additional handset, either use the administration program or follow this procedure:
1. Press the MENU key and go to EXT SERVICE.
2. Press the OK key and go to DELETE USERDATA.
3. Press the OK key.
The Serial Number of the Master handset (channel 00) is displayed.
4. Select the number of the handset (Master or additional) to delete.
5. Press the OK key.
Part 2: DECT Hardware Installation and Programming
37