Table of Contents
Advertisement
Figure 1.11 demonstrates a hotel installation where the radio coverage is established
by registering two Repeaters on the same Base Station. The Base Stations are
placed in the area where the highest traffic intensity may occur. This can be repeated
on each floor and thus create the radio coverage with a relatively small number of
Base Stations compared to the area of the building.
Displacement of Traffic Capacity Using Repeaters
In multi-cell installations it may be
necessary to establish high traffic
areas, depending on working cond-
itions and movement patterns. An
example would be a meeting room or
canteen. The task can be achieved by
installing more Base Stations covering
the same area and increasing the
channels. Another solution is to move
traffic channels from an adjoining Base
Station,
so
that
available when needed rather than all
the time.
Part 1: Site Survey and Overview of DECT Systems
Figure 1.11
the
capacity
is
Base Station
– traffic
capacity 1E
Repeater
– traffic
capacity 0.15E
Area covered by Base
Station and Repeater
Total of 6 traffic channels
Figure 1.12
22
Advertisement
Table of Contents
