Led Indicator Specifications; In Normal Operation Mode (When The Mode Led Is Lit "Green") - Mitsubishi Electric Q06CCPU-V-H01 User Manual

4.2 LED Indicator Specifications

4.2.1 In normal operation mode (When the MODE LED is lit "green")

Change the operation mode by the switch. (Refer to Section 4.3)
1
LED indicator*
On
RUN
Off
Flashing
On
Off
MODE
Flashing
On
ERR.
Off
Flashing
On
USER Off
Flashing
On
Off
CF CARD
Flashing
On
CH2 SD/RD
Off
On
100M
Off
On/Flashing
SD/RD
Off
*1 All LEDs turn off while the module is reset.
*2 When a system watchdog timer error has occurred, the RUN LED and MODE LED
turn off and the ERR. LED flashes.
*3 For the bus interface function details, refer to the C Controller Module User's
Manual.
Q06CCPU
-V-H01
RUN MODE
ERR.
CF CARD
USER
CH2 SD/RD
LED status
The C Controller module is in the RUN status.
(Output (Y) from user program and writing to buffer
memory are enabled)
The C Controller module is in the STOP/PAUSE
status. (Output (Y) from user program and writing to
buffer memory are disabled)
The script file "STARTUP.CMD" is in execution.
Normal operation mode (VxWorks running)
Hardware fault occurred or during reset
Shutdown completed
(Refer to the C Controller Module User's Manual.)
Continue error occurred
Normal
Stop error occurred *
Can be controlled by the user program
QBF_ControlLED function *
CompactFlash card mounted
(Refer to the C Controller Module User's Manual.)
CompactFlash card not mounted or unmounted
(Refer to the C Controller Module User's Manual.)
CompactFlash card being unmounted by the
RESET/SELECT switch
(Refer to the C Controller Module User's Manual.)
CH2 side (RS-232 interface) sending or receiving data
Data not transmitted
Being connected at 100Mbps
Being connected at 10Mbps
CH1 side (10BASE-T/100BASE-TX interface) sending
or receiving data
Data not transmitted
CH1 10BASE-T/
100BASE-TX
Description
2
3
17
100
M
SD/
RD