Table of Contents
Advertisement
4.3 Switch Operation
4.3.1 RUN/STOP/MODE switch operation
Position
In normal operation mode
RUN
In hardware
self-diagnostic operation
mode
Operation of the C Controller module is stopped. *
Switching RUN to STOP turns off all outputs (Y).
STOP
(Output (Y) from user program and writing to buffer memory are
disabled)
Used by the hardware self-diagnostics function.
MODE
For the hardware self-diagnostic function, refer to the C Controller
Module User's Manual.
*1 Output (Y) and writing to buffer memory, etc. from the <<Module monitor>>
tab of the C Controller setting utility are executable.
STOP
MODE
RUN
Operation
The C Controller module is operating.
(Output (Y) from user program and
writing to buffer memory are enabled)
For the hardware self-diagnostic
function, refer to the C Controller
Module User's Manual.
19
1
Advertisement
Table of Contents
