Location Of Controls; Adjusting The Ringer Volume; Adjusting The Display Contrast - Panasonic KX-T7560 Quick Reference Manual

Location of Controls

KX-T7565
LCD (Liquid Crystal Display)
PROGRAM: Used to enter and exit the
programming mode. (For station
programming mode only. For system
programming, please use another Digital
Proprietary Telephone with display.)
VOLUME Control Button: Used to
adjust the volume.
INTERCOM: Used to make or receive
intercom calls.
FLASH/RECALL: Used to disconnect
the current call and make another call with
holding the same outside line.

Adjusting the ringer volume

Adjust the RINGER volume selector lever
(at the bottom of the unit) to the desired setting.
( – OFF, – LOW,

Adjusting the display contrast

While idle and on-hook, and not ringing
Press FLASH/RECALL button first. Press UP ( ) or DOWN ( ) key within
2 seconds after releasing FLASH/RECALL button. (3 steps)
Printed in Malaysia
AUTO DIAL/STORE: Used for speed
dialling in the system or storing program
changes.
TRANSFER: Used to transfer a call to
another party.
REDIAL (ordinarily): Used to redial.
PAUSE (in programming): Used to
insert a pause for One-touch dialling numbers.
HOLD: Used to place a call on hold.
SP-PHONE: Used for the handsfree
operation.
MONITOR (KX-T7560 only): Used for
handsfree dialling. You can monitor the
party's voice handsfree.
Microphone: Used for the handsfree
conversation.
AUTO ANS (Auto Answer): Used to
answer an intercom call automatically
without touching telephone.
VOICE CALL (KX-T7560 only): Used to
monitor an intercom call automatically.
MUTE: Used to listen to the other party
without them hearing you. You can mute
the handset microphone or the Microphone.
Flexible Outside (CO) Line Button:
Used to make or receive an outside call,
or access a feature if the button is assigned
as a One-touch dialling button.
The display and Microphone are not
available for the KX-T7560.
– HIGH)
(KX-T7565 only)
PSQW1567YA-BM
— 6 —
RINGER
KK1000TT1013 (AL)