Logging; Logging Overview; Default Logging Capacity - Siemens 9410RC User Manual

9410 series

Logging

Logging overview

Default logging capacity

Data recorder number Log name
1 Revenue Log
9 Loss Log
2, 3, 4 Historic Logs
39 Daily Nominal Log
7, 8 Harmonics Logs
N/A Waveform recorders (6 total)
N/A COMTRADE records
10 Energy/Demand (EgyDmd Log)
5 Sag/Swell Log
N/A Event Log
11, 12, 17, 19 - 26, 28, 29, EN50160 Logs
32, 35
6, 16, 37, 38, 40 4-30 Logs
100
The meter is equipped with data recorders that enable you to log and monitor various
metering functions and features.
Your meter can support up to 50 logs (data recorders) which can each record up to 16
different parameters.
Your meter has a number of onboard default logs (also called data recorders) that are
used to store data related to:
• Power quality and compliance
• Trending and forecasting
• Energy/revenue metering
• Meter events
Your meter also logs voltage and current waveform data when a sag or swell is
detected. You must enter your power system's nominal values and configure your
meter so that it can identify sags and swells. You can configure your meter's setpoint
learning feature to learn your power system's normal operating values and use that
information to help identify voltage sags and swells.
Logged data can be retrieved by energy management software.
Related Topics
• Minimum configuration requirements for basic metering
Summarizes the default logging depths and intervals for your meter's onboard data
and waveform recorders.
Depth Interval
3360 (35 days) 900 seconds (15 minutes)
3360 (35 days) 900 seconds (15 minutes)
3360 (35 days) 900 seconds (15 minutes)
450 Triggered on demand
840 (35 days) 3600 seconds (1 hour)
30 Triggered on demand
1 Triggered by waveform recording
3360 (35 days) 900 seconds (15 minutes)
100 Triggered on demand
500 Triggered on demand
varies EN50160 intervals
varies IEC61000-4-30 intervals
Logging
7EN05-0336-01